HP UX Internet and Networking Software Activeisrcount, Activelusesscount, Activesscpsesscount

Administration Commands

query_ls

The adjacent node type is unknown.

node_id

Node ID received from the adjacent node during XID exchange.

active_isr_count

Number of active intermediate sessions using this link.

active_lu_sess_count

Number of active LU-LU sessions using this link.

active_sscp_sess_count

Number of active PU-SSCP sessions using this link.

reverse_anr_label

The Reverse Automatic Network Routing (ANR) label for this link station.

local_address

The local address of this link station. For an Enterprise Extender (HPR/IP) link, this is shown as as a dotted- decimal IP address (such as 193.1.11.100.

actual_max_send_btu_size

Negotiated maximum send BTU size.

description

A text string describing the LS, as specified in the definition of the LS.

port_name

Name of the port associated with this link station. If the link is to a virtual routing node (VRN), this parameter specifies the name of the actual port used to connect to the VRN (as specified in the define_cn command).

adj_cp_name

Fully qualified name of the adjacent control point. This parameter is used only if adj_cp_type specifies that the adjacent node is an APPN node or a back-level LEN node.

adj_cp_type

Adjacent node type. Possible values are:

LEARN_NODE

APPN-capable node; the node type will be identified during XID exchange.

END_NODE

An End Node, a Branch Network Node acting as an End Node from the local node’s perspective, or a LEN node that includes the Network Name CV in its XID3.

NETWORK_NODE

A Network Node, or a Branch Network Node acting as a Network Node from the local node’s perspective.

BACK_LEVEL_LEN_NODE

Back-level LEN node (one that does not include the Network Name CV in its XID3).

HOST_XID3

Host node. SNAplus2 responds to a polling XID from the node with a format 3 XID.

HOST_XID0

Host node. SNAplus2 responds to a polling XID from the node with a format 0 XID.

422