Administration Commands
query_lu_lu_password
This LU is a printer LU that has been associated with a display LU by a de- fine_tn3270_association command, or a display LU that has been associated with a printer LU by a define_tn3270_association command.
request_lu_name
Requested LU name or associated display LU name.
Returned Parameters for an LU Used by an LUA Application
The detailed information returned contains the following parameters in addition to those shown in Section 2.142.3, Returned Parameters: Detailed Information:
Parameter name | Type | Length |
app_typeconstant
app_type
Type of application using this LU. This parameter is set to LUA_APPLICATION.
2.142.4 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_LU_NAME
The list_options parameter was set to LIST_INCLUSIVE to list all entries starting from the supplied name, but the lu_name parameter value was not valid.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.143 query_lu_lu_password
The query_lu_lu_password command returns information about passwords used for
443
