Administration Commands
query_downstream_pu
Name of the PU for which information is required, as specified on define_*_ls, or the name to be used as an index into the list of PUs. This value is ignored if list_options is set to FIRST_IN_LIST. The name is a
dspu_services
DSPU services filter. Specifies whether to filter the returned information by the type of services provided to the PUs. Possible values are:
PU_CONCENTRATION
Return information only about downstream PUs served by PU concentration.
DLUR
Return information only about downstream PUs served by DLUR.
NONE
Return information about all downstream PUs.
2.129.2 Returned Parameters
Parameter name | Type | Length |
dspu_name | character | 8 |
description | character | 31 |
ls_name | character | 8 |
pu_sscp_sess_active | constant |
|
dspu_services | constant |
|
rcv_ru_size | decimal |
|
send_ru_size | decimal |
|
max_send_btu_size | decimal |
|
max_rcv_btu_size | decimal |
|
send_data_frames | decimal |
|
send_fmd_data_frames | decimal |
|
send_data_bytes | decimal |
|
rcv_data_frames | decimal |
|
rcv_fmd_data_frames | decimal |
|
rcv_data_bytes | decimal |
|
sidh | hex number |
|
sidl | hex number |
|
odai | constant |
|
pacing_type | constant |
|
If the command executes successfully, SNAplus2 returns the following parameters:
dspu_name
Name of the downstream PU.
description
A text string describing the LS to the downstream PU, as specified in the definition of the LS.
ls_name
Name of the LS used to access the downstream PU.
pu_sscp_sess_active
Specifies whether the
YES
The session is active.
378