Administration Commands
query_dspu_template
If the command executes successfully, the following parameters are returned:
template_name
Name of the DSPU template.
description
Resource description, as defined on the define_dspu_template command.
max_instance
The maximum number of instances of the template which can be active simultaneously.
active_instance
The number of instances of the template which are currently active.
num_of_dslu_templates
Number of downstream LU templates for this downstream PU template. Following this parameter are num_of_dslu_templates entries, one for each DSLU template.
Each dslu_template subrecord contains the following parameters:
min_nau
Minimum NAU address in the range of DSLU templates.
max_nau
Maximum NAU address in the range of DSLU templates.
allow_timeout
Indicates whether SNAplus2 is allowed to timeout host LUs used by this downstream LU if the session is left inactive for the timeout period specified on the host LU definition. Possible values are:
YES
SNAplus2 is allowed to timeout host LUs used by this downstream LU.
NO
SNAplus2 is not allowed to timeout host LUs used by this downstream LU.
This field is ignored if the downstream LUs are used to communicate with a SNAplus2 Primary RUI application instead of a host.
delayed_logon
Indicates whether SNAplus2 delays connecting the downstream LU to the host LU until the first data is received from the downstream LU. Instead, a simulated logon screen is sent to the downstream LU. Possible values are:
YES
SNAplus2 delays connecting the downstream LU to the host LU.
NO
SNAplus2 does not delay connecting the downstream LU to the host LU.
This field is ignored if the downstream LUs are used to communicate with a SNAplus2 Primary RUI application instead of a host.
host_lu_name
Name of the host LU or host LU pool onto which all the downstream LUs within the range will be mapped.
If the downstream LUs are used to communicate with a SNAplus2 Primary RUI application instead of a host, this field is set to the string #PRIRUI#.
382
