HP UX Internet and Networking Software manual 482

Administration Commands query_node

hpr_support	constant
ptf_flags	constant
max_ls_exception_events	decimal
max_compress_level	constant
up_time	decimal
nn_functions_supported	constant
en_functions_supported	constant
nn_status	constant
nn_frsn	decimal
nn_rsn	decimal
def_ls_good_xids	decimal
def_ls_bad_xids	decimal
dyn_ls_good_xids	decimal
dyn_ls_bad_xids	decimal
dlur_release_level	decimal
fq_nn_server_name	character	17
current_isr_sessions	decimal
nns_dlus_served_lu_reg_supp	constant
nn_functions2	constant
branch_ntwk_arch_version	decimal

If the command executes successfully, the following parameters are returned:

description

A text string describing the node, as specified in the definition of the node.

node_type

Type of node. Possible values are:

LEN_NODE

Low entry networking (LEN) node

END_NODE

APPN end node

NETWORK_NODE

APPN network node

BRANCH_NETWORK_NODE

APPN branch network node

fqcp_name

Fully qualified CP name of the node.

cp_alias

Locally used CP alias.

mode_to_cos_map_supp

Specifies whether the node provides mode-to-COS mapping. This parameter is ignored for a network node; mode-to-COS mapping is always supported. For a LEN node, mode-to-COS mapping is not supported. Possible values are:

YES

Mode-to-COS mapping is supported. A mode defined for this node must include its associated COS name, which specifies either an SNA-defined COS or one defined using define_cos.

NO

Mode-to-COS mapping is not supported. Default COS names will be used.

482