Administration Commands
query_nn_topology_tg
Specifies whether the owning node’s contention winner
YES
The
NO
The
UNKNOWN
The
branch_tg
Specifies whether the TG is a branch TG. Possible values are:
YES
The TG is a branch TG.
NO
The TG is not a branch TG.
UNKNOWN
The TG type is unknown.
2.154.4 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_TG
The list_options parameter was set to LIST_INCLUSIVE to list all entries starting from the supplied name, but the tg_num parameter value was not valid.
INVALID_ORIGIN_NODE
The list_options parameter was set to LIST_INCLUSIVE to list all entries starting from the supplied name, but the owner parameter value was not valid.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Function Not Supported
If the command does not execute because the node’s configuration does not support it, SNAplus2 returns the following parameter:
primary_rc
FUNCTION_NOT_SUPPORTED
The local node is an end node or LEN node. This command is valid only for a network node.
