Administration Commands
query_nn_topology_node
Peripheral border node function is supported.
EXTENDED_BORDER_NODE
Return border node function is supported.
CDS
Central directory server function is supported.
GATEWAY
Gateway node function is supported.
INTERCHANGE_NODE
Interchange node function is supported.
ISR
Intermediate session routing function is supported.
HPR
Node supports the base functions of High Performance Routing (HPR).
RTP_TOWER
Node supports the Rapid Transport Protocol tower of HPR.
CONTROL_OVER_RTP_TOWER
Node supports HPR control flows over the Rapid Transport Protocol tower.
branch_aware
Specifies whether the node supports branch awareness, APPN Option Set 1120.
NO
The node does not support option set 1120.
YES
The node supports option set 1120.
2.152.4 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_NODE
The list_options parameter was set to LIST_INCLUSIVE to list all entries starting from the supplied name, but the node_name parameter value was not valid.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
470
