Preparations
Default Operation Mode
System Menu/
Counter
Sor T
Common Setting
Enter
Sor T
Default Operat
Enter
Use the following procedure to set the operation mode selected when the machine is powered on. Modes available are Copy Operation, Send Operation or Status Operation. It is recommended you select the most commonly used mode as the default.
1 From System Menu/Counter press S or T to select Common Setting and
press Enter.
If you are unsure how to use this route map refer to Accessing Menu Items on page
2 Press S or T to select Default Operat and press Enter.
3 Press S or T to select the default operation mode from among Status, Copy
or Send.
4 Press Enter. The message display shows Completed and returns to Common
Setting.
5 Press right Select. The message display returns to the basic screen.
OPERATION GUIDE |
