Preparations
Network Settings
Registering the IP Address
System Menu/
Counter
Sor T
System Setting
Enter
Sor T
Network Setting
Enter
Sor T
TCP/IP Setting
Enter
Sor T
IP Address
Enter
Check the IP address with your network administrator before performing this setting. This will only function if the DHCP setting is Off and the TCP/IP setting is On. Any changes made to the network settings will become valid after you turn the power to the machine off and then back on again.
To manually register the IP address.
1 Access IP Address.
If you are unsure how to use this route map refer to Accessing Menu Items on page
2 Use the numeric keys to enter each segment of the IP address in turn, pressing X or [*.] to move between segments.
3 Press Enter on completion.
If you make an error in entering a portion of the IP address, press W to return to the previous block of digits and
4 Register the Subnet Mask - refer to Registering the Subnet Mask on page
System Menu/
Counter
Sor T
System Setting
Enter
Sor T
Network Setting
Enter
Sor T
TCP/IP Setting
Enter
Sor T
Subnet Mask
Enter
Registering the Subnet Mask
1 Access Subnet Mask.
If you are unsure how to use this route map refer to Accessing Menu Items on page
2 Use the numeric keys to enter each segment of the Subnet Mask in turn, pressing X or [*.] to move between segments.
3 Press Enter on completion.
If you make an error in entering a portion of the Subnet Mask, press W to return to the previous block of digits and
4 Register the Default Gateway - refer to Registering the Default Gateway on
page
OPERATION GUIDE |
