HP UX Internet and Networking Software manual Query3270diag, Path Switch Failure

Administration Commands

query_3270_diag

PATH_SWITCH_DISABLED

secondary_rc

(No secondary return code is returned.)

Path Switch Failure

If the command does not execute because the path switch attempt fails, SNAplus2 returns the following parameter:

primary_rc

UNSUCCESSFUL

secondary_rc

(No secondary return code is returned.)

Function Not Supported

If the command does not execute because the node’s configuration does not support it, SNAplus2 returns the following parameters:

primary_rc

FUNCTION_NOT_SUPPORTED

This node is not defined to support High Performance Routing (HPR).

secondary_rc

(This parameter is not used.)

Other Conditions

Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.

2.98 query_3270_diag

The query_3270_diag command returns information about the 3270 diagnostics parameters for the SNAplus2 system. The command always returns information about the parameters used to record and display response-time data. Depending on the options used, it can also return data about one or more 3270 user alerts that users can send to the host NetView program.

This command is not associated with a particular node because 3270 diagnostics parameters are defined as domain resources.

If 3270 diagnostics parameters have not been defined, the command returns the default parameters that SNAplus2 uses for response-time data; no alert definitions are returned.

2.98.1 Supplied Parameters

Parameter name	Type	Length	Default
[query_3270_diag]
num_entries	decimal		0
list_options	constant		LIST_INCLUSIVE
alert_number	decimal		1

Supplied parameters are:

num_entries

294