Administration Commands
query_cos
Possible values are:
FIRST_IN_LIST
Start at the first entry in the list
LIST_INCLUSIVE
Start at the entry specified by the cos_name parameter
LIST_FROM_NEXT
Start at the entry immediately following the entry specified by the cos_name parameter
cos_name
COS name for which data is required, or the name to be used as an index into the list. This value is ignored if list_options is set to FIRST_IN_LIST. The name is a
2.111.2 Returned Parameters
Parameter name | Type | Length |
cos_name | character | 8 |
description | character | 31 |
transmission_priority | constant |
|
num_of_node_rows | decimal |
|
num_of_tg_rows | decimal |
|
trees | decimal |
|
calcs | decimal |
|
rejs | decimal |
|
If the command executes successfully, SNAplus2 returns the following parameters:
cos_name
Specifies the class of service (COS) name which is an
description
A text string describing the COS, as specified in the definition of the COS.
transmission_priority
Specifies the transmission priority. Possible values are:
LOW
The session using this COS is given low priority.
MEDIUM
The session using this COS is given medium priority.
HIGH
The session using this COS is given high priority.
NETWORK
The session using this COS is given the highest priority.
num_of_node_rows
Number of node rows defined for this COS.
num_of_tg_rows
Number of TG rows defined for this COS.
323
