HP UX Internet and Networking Software manual Define3270diag, Rtmoverflow

Administration Commands

define_3270_diag

INVALID_MODE_NAME

The mode_name parameter did not match any defined mode name.

INVALID_PLU_NAME

The fqplu_name parameter did not match any defined partner LU name.

State Check

No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.

Other Conditions

Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.

2.9 define_3270_diag

The define_3270_diag command specifies the 3270 diagnostics parameters for the SNAplus2 system, such as the parameters used to record and display response-time data and the 3270 user alerts that users can send to the host NetView program. The command can be used to define 3270 diagnostics parameters for the first time or to modify an existing definition.

This command is not associated with a particular node because the 3270 diagnostics parameters are defined as domain resources.

2.9.1 Supplied Parameters

Parameter name	Type	Length	Default
[define_3270_diag]
rtm_overflow	constant		NO
rtm_unbind	constant		NO
rtm_timer_option	constant		RTM_SCREEN
rtm_thresh1	decimal		0.5
rtm_thresh2	decimal		1.0
rtm_thresh3	decimal		2.0
rtm_thresh4	decimal		5.0
{alert_3270_data}
description	character	53	(null string)
parameter1	character	33	(null string)
parameter2	character	33	(null string)
parameter3	character	33	(null string)

(You can include 0–20 alert_3270_data subrecords.)

Supplied parameters are:

rtm_overflow

Specifies whether to send RTM data to the host every time one of the RTM counters overflows (reaches its maximum value). There is a counter for each of the intervals defined by the rtm_thresh values. Possible values are:

YES

57