6.4Installing the ventilation system
|
|
|
|
| L 200 |
L 100 | ||
|
|
|
|
|
|
To install the ventilation grilles, cut two rectangles (451mm x 156mm) in the outer wall of the vehicle (for position of the cuts, see point 6.3).
Item 1 does not apply for installation framess with an integrated seal.
1. Seal the mounting frame, making it waterproof.
2. Insert the frame ... | ... and screw into position. |
3. Insert the ventilation grilles. | 4. Lock the ventilation grilles.. |
5.Clip the extractor insert in position (only for upper ventilation system L100)
6. Insert winter cover
20
