5.Keep rotary switch (B) depressed for another
6.Check the inspection glass to see whether a flame is burning.
7.Repeat the entire process if the flame has gone out.
8.Use rotary switch (B) to regulate the temperature in the main refrigerator compartment.
2. Automatic ignition | B | |
A | 1. Set energy |
|
selector switch (A) to Gas. 
2.Press and hold rotary switch (B).
D
3. The ignition process is activated automatically, accompanied by a ticking sound; the indicator lamp (D) will flash. Upon successful ignition, the sound and the flashing will stop.
4. Keep rotary switch "B" depressed for another
5. If the flame goes out, the ignition system will repeat the ignition process automatically.
6. Adjust the temperature in the main refrigerator compartment using rotary switch "B".
All refrigerators, whether manual or automatic ignition, are equipped with automatic flame protection, which automatically cuts off the supply of gas approximately 30 seconds after the flame goes out.
When using for the first time, and after changing the gas cylinder, the gas pipes may contain air. By means of brief operation of the refrigerator and any other gas appliances (e.g. cookers), air is removed from the gas pipes. The gas will then ignite without delay.
5.2.4Temperature setting cooling compartment
B
middle position
As already shown, with rotary knob (B) the temperature in the cooling compart- ment can be regulated as necessary.
The cooling unit’s performance is influenced by ambient temperatures.
At ambient temperatures of +15°C up to 25°C, set the knob B to the
TIP middle position. The cooling unit works with optimal performance.
8
