Accessories/Options
2Setting-up
Bottom view Television unit | * Place pedestal on |
| a horizontal and |
| level surface. |
Lift the television unit above the pedestal, with the back of the television unit on the same side as the pedestal Label. Then align the holes in the television unit (bottom) with the poles of the pedestal and lower the television unit into place.
For 58'' Plasma television
Accessories for pedestal security
1 Band (4) | 2 Screw (4) | 3 Wood screw (4) | 4 Hook (2) | 5 Hook securing |
|
|
|
| screw (2) |
| Nominal diameter |
|
| M8 x 35 |
|
|
|
|
Hole for installation
Use the assembly screws B (M5 x 30) to fasten securely.
4 mm x 12 |
Rear side
Arrow mark
Pole
Label
pedestal
Pole
Pedestal
ŶSecuring to a base.
ŶSecuring to a wall.
Hook 
* Use a |
to remove the caps at the left |
and right top on the rear side |
of the plasma TV, and attach |
the hooks 4 to the plasma |
TV using the hook securing |
screws 5 . (Keep the caps |
you have removed in a safe |
place.) |
Quick Start Guide
3Stopping the plasma television from falling over
* The plasma TV must be fastened to both the base and the wall.
For 37'', 42'', 50'' Plasma television
Accessories for pedestal security
1 Band (2) | 2 Screw (2) | 3 Wood screw (2) | 4 Clamp (2) |
Front
Wood
Hook securing screw 5
• Securing method
Hook 
* Use a strong wire or chain |
which is commercially |
available to secure the hooks |
4 to a solid area of the wall |
or pillar. |
Accessories/Options
Nominal diameter 4 mm x 12
ŶSecuring to a base
Front
Front
D
Wood Worktop
Fasten with wood screws in the holes in the back edge of the wood worktop. If there are no holes, first drill them in the middle of the thickness of the wood worktop, and then fasten the strap with wood screws.
ŶSecuring to a wall
* Remove the screws at both top corners on the rear side of the plasma TV, and attach the clamps 4 to the plasma TV using the removed screws.
Screws on main body
Securing method
* Use strong wire or chain which is commercially available to secure the plasma television to a solid area of the wall or a pillar.
Worktop
Fasten with wood screws in the holes in the back edge of the wood worktop. If there are no holes, first drill them in the middle of the thickness of the wood worktop, and then fasten the strap with wood screws.
8 | 9 |
