Control with HDMI “HDAVI ControlTM”
Recommended HDMI Connections
Follow the connection diagrams below for HDMI control of |
| If connection (or setting) of equipment compatible with HDMI |
a single AV piece of equipment such as a Panasonic DIGA- |
| control is changed, switch the power of this unit Off then |
DVD recorder, RAM Theater or Player Theater system. |
| On again while the power of all equipment is On (to this |
Refer to page 22 for Setup Menu settings and additional |
| unit to correctly recognize the connected equipment) and |
control information. |
| check that DIGA, RAM theater and Player theater playback |
Optional HDMI and/or optical cables are not provided. |
| operates. |
|
|
|
ŶConnecting this unit to a DVD recorder, RAM theater or Player theater
ŶConnecting this unit to a DVD recorder and AV amp
When using an “Control with HDMI”
| For DIGA : | |
| •Connect with HDMI cable | |
| For RAM theater and Player theater : | |
| •Connect with HDMI cable and audio cable. | |
| Connect the TV’s PROG. OUT audio | |
| (L&R) to listen to the TV program | |
| through the theater system. | |
Back of the unit | Note | |
HDMI 1 is recommended. | ||
| ||
| •When connecting to HDMI 2, set the | |
| input mode to HDMI 2 (p. 19) initially | |
| before connecting to HDMI 2. After | |
| connection, confirm the HDMI control | |
| functions (p. |
HDMI cable | Audio Cable |
HDMI | HDMI | Audio | HDMI | Audio |
(AV OUT) | (AV OUT) | IN | (AV OUT) | IN |
| or |
| or |
|
Optic fiber
HDMI cable
Digital audio input (Optic)
HDMI (AV IN)
•One AV amp and one DIGA can be operated with this unit.
•Be sure to connect the AV amp between this unit and the DIGA.
Note
•HDMI 1 is recommended.
When connecting to HDMI 2, set the input mode to HDMI 2 (p. 19) initially before connecting to HDMI 2. After connection, confirm the HDMI control functions (p.
HDMI (AV OUT)
Panasonic AV amp
HDMI cable
HDMI (AV OUT)
DIGA (Panasonic DVD Recorder)
Control with HDMI “HDAVI ControlTM” Advanced
DIGA | Panasonic RAM theater | Panasonic Player theater |
(Panasonic DVD Recorder) |
|
|
ŶSetting of this unit after connection
After making connections as shown above, set “Ctrl with HDMI” (under “Other adjust”) to “On” using the Setup menu. (p. 22).
Note
•Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.
24
ŶSetting of this unit after connection
After making connections as shown above, set “Ctrl with HDMI” (under “Other adjust”) to “On” using the Setup menu. (p. 22).
Note
•Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.
•When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
25
