Getting Started
Setting the speakers’ channels
You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup. Speaker settings are only active on
Digital Output |
|
Night mode |
|
Analog Output |
|
Speakers | Personal setting ... |
Speaker Layout |
|
PCM Output |
|
Set Speaker | Front L & R |
| Center |
| Surr L & R |
Sub Woofer
OK to exit
On | 3 ms 3 dB 6 dB |
A B C
1Press SURR. (or SURROUND on the front panel) repeatedly to select
2In disc mode, press SYSTEM MENU.
3 Select
4Use the joystick (1 2 3 4) on the remote to navigate in the menu.
Move to and press 2. Move to ‘Speakers’ and press 2.
5Press 3 4 to select (Front L&R, Center,
Surr L&R, Sub Woofer), then press 2 to enter the speaker setting menu.
➜ The test tone will be automatically generated.
6Use 3 4 to adjust the settings for each speaker that suit your surround sound needs, which may includes :
A Turning on or off the sound output.
B Delay time settings - use the longer delay settings when the surround speakers are closer to the listener than the front speakers.
C Adjusting the volume levels for one or both speakers until the sound evens.
7Press OK to confirm.
Step 5: Setting language preference
You can select your preferred language settings so that this DVD system will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the disc’s default setting language will be used instead. Except the DVD system’s menu language, it will remain once selected.
SETUP MENU
➠
Parental Control |
|
|
Password |
|
|
Menu Language | English |
|
Defaults | Français |
|
|
| |
| Audio Language | English |
| Subtitle | English |
| Disc Menu | English |
Go to language setup page
1In disc mode, stop playback and press
SYSTEM MENU.
2 Select | icon and press 4. |
3Use the joystick (1 2 3 4) on the remote to navigate in the menu.
Move to and press 2.
Move to ‘Menu Language’ and press 2.
4Select a language and press OK.
5Use the joystick (1 2 3 4) on the remote to navigate in the menu.
Move to and press 2.
Move to one of the following and press 2.
–‘Audio Language’ (disc’s soundtrack)
–‘Subtitle’ (disc’s subtitles)
–‘Disc Menu’ (disc’s menu)
6Select a language and press OK.
7 Repeat steps 5~6 for other settings.
E n g l i s h
To remove the menu | To remove the menu | |
Press SYSTEM MENU. | ||
Press SYSTEM MENU. |
21