Canon S50 manual Setting the White Balance

Setting the White Balance (continued)

•Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 180)

•To set and use a custom white balance setting, it is advisable to select the Shooting mode and set the exposure compensation and flash exposure compensation to zero (±0). The correct white balance may not be obtained when the exposure is incorrect (image is completely black or white).

•It is also advisable to use the LCD monitor to compose the shot and to further zoom in.

•Since the white balance data cannot be read in mode, preset the white

balance in another Shooting mode first before selecting mode.

•Set the flash on or off when setting a custom white balance.

The white balance may not be accurate if the setting conditions and shooting

conditions are not the same.

If the flash fires when setting a custom white balance with the flash set to or , ensure that you also use the flash when you go to shoot.

82