Canon S50 manual Charging the Battery Pack, Align the edge of the battery pack with

Preparing the Camera

Charging the Battery Pack

Recharge Battery Pack NB-2L (supplied) with Battery Charger CB-2LT or CB-2LTE before you use the camera for the first time and subsequently when the “Charge the battery pack” message is displayed.

1	Align the edge of the battery pack with
	the line on the battery charger, then slide
	the battery in the direction of the arrow.

Basic Functions

2

CB-2LT

Charge Indicator

CB-2LTE

Charge Indicator

Battery charger model names and types vary by region.

(For CB-2LT)

Plug the battery charger into a power outlet.

(For CB-2LTE)

Attach the power cord to the battery charger and plug it into a power outlet.

(For CB-2LT and CB-2LTE)

•The charge indicator will light red while the battery pack is charging. It will change to a steady green when the charge is complete.

•After charging, unplug the battery charger and remove the battery pack from it.

Preparing the Camera,

To protect and prolong the life of the battery pack, do not charge it for 24 hours or longer at a time.

•This is a lithium ion battery pack so there is no need to completely use or discharge it before recharging. It can be recharged at any time.

•It takes approximately 80 minutes to bring a fully discharged battery pack to full charge (based on Canon’s testing standard). Charging it within a temperature range of 5 to 40º C (41 to 104º F) is recommended.

•Charging times will vary according to the surrounding humidity and battery pack charge state.

•You may hear a noise during charging. This is not a malfunction.

15