Canon S50 manual Message or error code may not display with some models, 161

The following messages may appear when the camera is connected to the Direct Print compatible Bubble Jet Printer.

On Bubble Jet printers with operation panels, check the error number displayed on the panel and refer to the Bubble Jet Printer Quick Start Guide.

(The message or error code may not display with some models.)

Printer in use:The printer is printing the data from the memory card inserted in the computer or printer. The printer automatically starts printing the images from the camera after completing the current printing.

Printer warming up: Printer is warming up. When it is ready, the printer starts printing automatically.

No print head:No print head is installed in the printer.

Printer cover open: Close the printer cover securely.

Media type error: You selected a paper type incompatible with the printer. Select a compatible paper type in the Print Style menu.

Paper lever error: Adjust the paper thickness lever to the proper position.

Low ink level:The ink tank needs to be replaced soon. Prepare a new ink tank. If you select [Continue] in the error screen, you can restart printing.

(This message may not display with some models.)

Waste tank full: You can restart printing by pressing the RESUME/ CANCEL button on Bubble Jet Printer. Please request replacement of the waste tank at your nearest Canon customer support center listed in the Contact List provided with the Bubble Jet Printer or in the Bubble Jet Quick Start Guide.

Printer error:Turn off the printer, then turn it on again. If the error persists, please consult your nearest Canon customer support center listed in the Contact List provided with the Bubble Jet Printer or in the Bubble Jet Quick Start Guide.

Appendix

161