Canon S50 Setting the White Balance, Select * Auto using C or D on the multicontroller, Press

Setting the White Balance

When the white balance mode is set to match the light source, the camera reproduces colors more accurately.

	Auto		Settings are automatically set by the camera
	Daylight		For recording outdoors on a bright day
	Cloudy		For recording under overcast, shady or twilight skies
	Tungsten		For recording under tungsten and bulb-type 3-wavelength fluorescent lighting
	Fluorescent		For recording under warm-white, cool-white or warm-white (3-wavelength) fluorescent lighting
	Fluorescent H	For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lighting
	Flash		For flash photography
	Custom1		For setting a custom value with a white sheet of paper, etc., to obtain the optimal white balance
			for the conditions. There are two custom values: custom1 and custom2.
	Custom2
1 Press the				/	/	button.

2 Select * (Auto) using C or D on the multicontroller.

* The current setting is displayed.

3 Select the desired setting using B or A on the multicontroller.

•Please see the next page regarding the custom setting.

•You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image in shot.

4 Press the / / button.

5 Shoot the image.

The white balance cannot be adjusted when the photo effect is set to (Sepia) or (B/W).

80