Canon S50 manual Select images for transferring, 143

3 Select images for transferring.

Single Images

•Select an image using B or A on the multicontroller and mark or remove marks from images using C or D on the multicontroller.

•You can use the same procedures to select images in index replay (3 images). Press the button to switch between single replay and index replay.

All the Images on a CF Card

•Press the button to switch to index replay (three images).

•Then press , and select [Mark All] using C or D

on the multicontroller and press again. (If you select [Clear All] instead of [Mark All], you can remove marks from all the images.)

•You can mark or remove a mark from each image after marking or removing marks from all the images.

4 The selection mode will turn off and the Transfer Order menu will reappear.

Press the button.

• Images are transferred in order from oldest to newest by the shooting date.

• A maximum of 998 images can be marked per CF card.

Printing, Transferring

143