Selecting Images for Slide Shows

You can mark images for inclusion in slide shows 1-3. Up to 998 images may be marked per slide show. Images display in the order of their selection.

1 Display the slide show menu (p. 114).

2 Select [Program] using C on the multicontroller. Then select [Show 1], [Show 2] or [Show 3] using B or A on the multicontroller.

A checkmark will appear beside a show already containing images.

3 Choose [Select] using D, and B or A on the multicontroller and

press .

4 Mark images to include in the show.

Single Replay

Move between images using B or A on the multicontroller and mark or remove marks from images using C or D on the multicontroller.

The selection number and a check mark appear at the top of selected images.

Index Replay

Press the button to switch to index replay (3 images).

Select an image using B or A on the multicontroller and mark or remove marks from images using C or D on the multicontroller.

A check mark and the selection order number appear at the bottom of selected images.

You can deselect all the images in a show by

pressing , selecting [Clear all] using C or D

on the multicontroller and pressing again.

5 The image selection screen will close.

Press the

button.

Replaying, Erasing

115

Page 121
Image 121
Canon S50 manual Selecting Images for Slide Shows, Press the button to switch to index replay 3 images, 115