Philips MX5700D Connecting TV, Connections, E n g l i s h, Using Scart jack, Using S-Videojack

E n g l i s h

Connections

Step 6: Connecting TV

	S-VIDEO
AUDIO	IN
OUT	SCART IN

VIDEO IN

OR

OR

SYSTEMSSPEAKER(8Ω)	CENTERSURROUNDFRONT	SR	SUB-WOOFER				Pb
		L			MW
		R				FM ANTENNA
		C			AUDIO		VIDEO
			DIGITAL	AUX	TV	LINE	OUT
		SL	OUT	IN	IN	OUT	CVBS
				L
				R			P-SCAN
							ON	OFF
			DIGITAL				S-VIDEO
			IN

~ AC MAINS

SCART OUT

IMPORTANT!

–You only need to make one video connection from the following options, depending on the capabilities of your TV system.

–Connect the DVD system directly to the TV.

–Scart Video connection provides higher picture quality and S-Video connection provides better picture quality. These options must be available on your TV.

–If both Scart Video and S-Video connections are used to connect to your TV, the video signal will automatically switch to S-Video when you power up the DVD system. To set the VIDEO OUT(put) to ‘Scart’, see page 30.

Using Scart jack

●Use the scart video cable (black) to connect the DVD system’s SCART jack to the corresponding Scart input jacks on the TV.

OR

Using Composite Video jack (CVBS)

●Use the composite video cable (yellow - not supplied) to connect the DVD system’s CVBS jack to the video input jack (or labelled as A/V In, Video In, Composite or Baseband) on the TV.

OR

Using S-Video jack

●Use the S-video cable (not supplied) to connect the DVD system’s S-VIDEO OUT jack to the S-Video input jack (or labelled as Y/C or S-VHS) on the TV.

12