HP UX Internet and Networking Software manual Dlcdata, Rsn, Status, Cpcpsessionactive

Administration Commands

query_local_topology

End node (EN) or low-entry networking (LEN) node

tg_num

Number associated with the TG.

dlc_data

If dest_type is VRN, this parameter specifies the DLC address of the connection to the VRN. The number of bytes in the address depends on the DLC type. This parameter is not used otherwise.

For Token Ring, Ethernet, or FDDI, the address is in two parts: a 6-byte MAC address and a 1-byte local SAP address. The bit ordering of the MAC address may not be in the expected format. For information about converting between the two address formats, see Bit ordering in MAC addresses in Section 2.60, define_tr_ls, define_ethernet_ls, define_fddi_ls.

rsn

Resource sequence number assigned by the owning network node.

status

Specifies the status of the TG. Possible values (which can be combined with a + character) are:

TG_OPERATIVE

Transmission group link is operative.

TG_CP_CP_SESSIONS

Transmission group link between CP-CP sessions.

TG_QUIESCING

Transmission group link is quiescing.

TG_HPR

Transmission group supports High Performance Routing (HPR) protocols.

TG_RTP

Transmission group supports Rapid Transport Protocol (RTP).

effect_cap through user_def_parm_3

TG characteristics. For more information about these parameters, see Section 2.60, define_tr_ls, de- fine_ethernet_ls, define_fddi_ls.

cp_cp_session_active

Specifies whether the owning node’s contention winner CP-CP session is active. Possible values are:

YES

The CP-CP session is active.

NO

The CP-CP session is not active.

UNKNOWN

The CP-CP session status is unknown.

branch_link_type

This parameter applies only if the node is a Branch Network Node; it is reserved otherwise.

Specifies the branch link type of this TG. Possible values are:

UPLINK

The TG is an uplink.

DOWNLINK

406