HP UX Internet and Networking Software Fqreqloccpname, Reqagentapplname, Seqnumdt, Fqorigincpname

Administration Commands

query_active_transaction

Start at the first entry in the list

LIST_INCLUSIVE

Start at the entry specified by the fq_req_loc_cp_name, req_agent_appl_name, and seq_num_dt parameters

LIST_FROM_NEXT

Start at the entry immediately following the entry specified by the fq_req_loc_cp_name, req_agent_appl_name, and seq_num_dt parameters

fq_req_loc_cp_name

Fully qualified control point name of the transaction requester. This parameter is ignored if list_options is set to FIRST_IN_LIST. The name is a type-A character string. It consists of a 1–8 character network name, followed by a period, followed by a 1–8 character control point name.

req_agent_appl_name

Application name of the transaction requestor. This parameter is ignored if list_options is set to FIRST_IN_LIST.

This name is normally a type-1134 character string (using uppercase A–Zand numerals 0–9); alternatively, it can be one of the MS Discipline-Specific Application Programs specified in Systems Network Architecture: Management Services.

seq_num_dt

Sequence number date/time correlator (17 bytes long) of the original transaction, as defined in Systems Network Architecture: Formats. This parameter is ignored if list_options is set to FIRST_IN_LIST.

2.101.2 Returned Parameters

Parameter name	Type	Length
fq_origin_cp_name	character	17
origin_ms_appl_name	character	8
fq_dest_cp_name	character	17
dest_ms_appl_name	character	8
fq_req_loc_cp_name	character	17
req_agent_appl_name	character	8
seq_num_dt	hex array	17

If the command executes successfully, SNAplus2 returns the following parameters:

fq_origin_cp_name

Fully qualified control point name of the CP initiating the transaction.

origin_ms_appl_name

Name of the application from which the transaction originates. This name is usually a type-1134 character string; alternatively, it can also be one of the MS Discipline-Specific Application Programs specified in Systems Network Architecture: Management Services.

fq_dest_cp_name

Fully qualified control point name of the transaction destination.

dest_ms_appl_name

Application name of the destination application for the transaction. This name is usually a type-1134 character string; alternatively, it can be one of the MS Discipline-Specific Application Programs specified in Systems Network Architecture: Management Services.

303