Administration Commands
query_tp
trace_flags
The types of tracing currently active.
If no tracing is active, or if tracing is active for all types of messages, one of the following values is returned:
NONE
No tracing is active.
ALL
Tracing of all types of messages is active.
If tracing is used on specific message types, SNAplus2 returns one or more of the following values are returned (combined using a + character):
TCP
Messages between TN server and TN3270 clients are traced.
FMAPI
Internal control messages and messages between TN server and TN3270 clients (in internal format) are traced.
CFG
Messages relating to the configuration of TN server are traced.
2.174.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
No parameter errors occur for this command.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.175 query_tp
The query_tp command returns information about transaction programs (TPs) currently being used by a local LU. It can be used to obtain information about a specific TP or about multiple TPs, depending on the options used. This command returns information about current usage of the TPs, not about their definition; use query_tp_definition to obtain the definition of the TPs.
This command must be issued to a running node.
2.175.1 Supplied Parameters
Parameter name | Type | Length | Default |
[query_tp]
