Administration Commands query_lu_0_to_3
plu_rcv_data_bytes | decimal |
|
plu_sidh | hex number |
|
plu_sidl | hex number |
|
plu_odai | constant |
|
plu_ls_name | character | 8 |
plu_name | character | 8 |
bind_lu_type | constant |
|
session_id | hex array | 8 |
description | character | 31 |
nau_address | decimal |
|
pool_name | character | 8 |
pu_name | character | 8 |
priority | constant |
|
lu_model | constant |
|
term_method | constant |
|
If the command executes successfully and you specified DETAIL as the list_options parameter value, the following parameters are returned:
lu_name
Name of the local LU.
lu_sscp_sess_active
Specifies whether the
YES
The session is active.
NO
The session is inactive.
appl_conn_active
Specifies whether an application is using the LU. Possible values are:
YES
An application is using the LU.
NO
No application is using the LU.
plu_sess_active
Specifies whether the
YES
The session is active.
NO
The session is inactive.
host_attachment
LU host attachment type.
When the command is issued to a running node, this parameter takes one of the following values:
DIRECT_ATTACHED
LU is directly attached to the host system.
DLUR_ATTACHED
LU is supported by DLUR on the local node.
