HP UX Internet and Networking Software manual Cpname, Wildcardlus

Administration Commands define_adjacent_len_node

2.10.1 Supplied Parameters

Parameter name	Type	Length	Default
[define_adjacent_len_node]
cp_name	character	17
description	character	31	(null string)
lu_name	character	8
wildcard_lus	constant		NO

(Up to 10 lu_name entries may be included.)

Supplied parameters are:

cp_name

The fully qualified name of the CP in the adjacent LEN end node. This name should match the name the LEN node sends on its XIDs (if the LEN node supports XIDs) and the adjacent CP name specified on the define_ls command for the link to the LEN node.

Specify 3–17 characters that consist of a 1–8 character network name, followed by a period, followed by a 1–8 character partner LU name.

description

A text string of 0–31 characters followed by a null character that describes the adjacent node. SNAplus2 uses this string for information only. It is stored in the node’s configuration file and returned on the query_directory_entry command.

lu_name

Name of an LU defined on the LEN node. Specify 1–8 type-A characters corresponding to the second part of the fully qualified LU name (the first part of the fully-qualified name is defined by the cp_name parameter).

To define an adjacent node with more than 10 LUs, use multiple define_adjacent_len_node commands for the same CP name.

To define the LU associated with the LEN node’s control point (the CP LU or default LU), specify the node’s fully qualified CP name in the cp_name parameter, and include the ’network name’ part of this name (the 8 characters after the period) as one of the LU names.

You can specify a ’wildcard’ LU name to match multiple LU names by specifying only the initial characters of the name. For example, the wildcard LU name LU will match LUNAME or LU01 (but will not match NAMELU). However, all the LU names specified on a single command must be of the same type (wildcard or explicit), as defined by the wildcard_lus parameter. To add both types of LU names for the same adjacent node, use multiple define_adjacent_len_node commands.

wildcard_lus

Indicates whether the specified LU names are wildcard entries or explicit LU names. Possible values are:

YES

The specified LU names are wildcard entries.

NO

The specified LU names are explicit entries.

2.10.2 Returned Parameters

No parameters are returned by SNAplus2 when this command executes successfully.

2.10.3 Error Return Codes

If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.

60