Using the detachable front panel
Removing the detachable front panel
The front panel of the unit may be removed as a theft deterrent. After removing the front panel, use the case provided to prevent the front panel from getting damaged.
1.Press the RELEASE ( 
) button to open the front panel.
2.Pull off the front panel.
3.Store the front panel in its protective case.
REL button | protective case |
|
front panel
Attaching the front panel
Hold the right side of the front panel with the plate facing forwards.
First attach the right side of the front panel to the unit by inserting it into the right notch. Then push the left side of the front panel inwards to fix it in the right place. Be sure it is fully inserted. If not, the display or some of the keys may not function properly.
Wiring diagram
Many vehicles are fitted with ISO connectors behind the dashboard, which makes it easier to connect your car radio.
These connections can be found in the dashboard where the car radio will be fitted. Use these cables to connect the car radio.
Should your car not be fitted with these ISO connectors, we strongly advise you to consult your car dealer or a specialist to obtain the right adaptor. Once you have these cables, you will need to connect your loudspeakers and the power supply to the
ISO connector, following the connection instructions below.
NOTE:
INCORRECT WIRING OR OPERATION WILL VOID THE WARRANTY OF THIS UNIT. The manufacturer cannot be held responsible in the event of a malfunction if the connections are not made properly.
User’s Manual - page 6
