Administration Commands
query_directory_entry
Name of the default mode. If an application specifies an unrecognized mode name when attempting to start a session, the parameters from this mode are used as a default definition for the unrecognized mode.
If no default mode name has been specified using the define_defaults command, this parameter is blank.
implicit_plu_forbidden
Indicates whether SNAplus2 puts implicit definitions in place for unknown partner LUs. Possible values are:
YES
SNAplus2 does not put implicit definitions in place for unknown partner LUs. All partner LUs must be defined explicitly.
NO
SNAplus2 puts implicit definitions in place for unknown partner LUs.
specific_security_sense_codes
Indicates whether SNAplus2 uses specific sense codes on a security authentication or authorization failure. Specific sense codes are only returned to those partner LUs which have reported support for them on the session. Possible values are:
YES
SNAplus2 uses specific sense codes.
NO
SNAplus2 does not use specific sense codes.
limited_timeout
Specifies the timeout after which free
2.117.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
No parameter errors occur for this command.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists additional combinations of primary and secondary return codes that are common to all commands.
2.118 query_directory_entry
The query_directory_entry command returns information about resources in the directory database. The command can return summary or detailed information about a specific resource or multiple resources, depending on the options used.
336
