Rinnai installation manual FEATURES OF THE RHFE-431WTAUNITS, Safety Devices

FEATURES OF THE RHFE-431WTA UNITS

◆Clean Heating Forced Flue Type

◆Easy Operation One-Touch Ignition

◆Sensible Temperature Control Feature

◆Comfortable Room Temperature Control and Display

◆Warm Air Outlet at Floor Level (Keeps Your Feet Warm)

◆Child Safety Function Lock

◆Room Temperature Setting Memory

◆Dirty Air Filter Indicator Lamp

◆Energy-Saving Economy Setting

◆Humidifier Tray

◆Air Flow Directional Louvers

◆Direct Vent Easily Installed

◆Proportional Heating Variable Capacity

◆Hush! Quiet Operation

◆Modern Design Minimizes Floor Space Requirements

◆Failure Message Display

◆Timer Override Mode

SAFETY DEVICES

Spark Safety Device: Automatically shuts unit down when there is an abnormal spark at time of ignition.

Flame Failure Device: Activated when burner flame fails. This prevents raw gas from being released.

Overheat Switch: This device automatically cuts the gas off if the heater exceeds a predetermined temperature. This is normally caused by an obstruction in front of the louvers, or a blocked fan filter.

Fusible Links: Backs up the overheat switch. If the fusible link cuts the unit off, a service call by an authorized person is required to replace the link.

Overcurrent Prevention Device: This is a 3 amp. glass fuse found on P.C. board. Design to shut unit down in case of overcurrent. If fuse blows all indicator lamps will be "OFF".

Power Outage Safety Device: This safety device cuts off gas passage and stops operation.

– 1 –