Rinnai RHFE-431WTA Setting the Clock, To Open the Control Panel, Setting the Current Time & DAY

SETTING THE CLOCK

■TO OPEN THE CONTROL PANEL

Lift lightly in the center of the lid. The control panel lid will then drop backward to an angle.

Note: When the appliance is first plugged in or after a power failure longer than 24 hours the display will show “PF”.

■SETTING THE CURRENT TIME & DAY

(This example shows setting the clock to 8:20am on Saturday).

DAY OF THE WEEK

1

2

3

Press the “Clock” button once. The day of the week and SelectClock is displayed.

Press either of the “▲” or “▼” buttons until the correct day of the week is displayed.

Press the “Select” button once to lock in and complete day of the week selection. The time of day will then flash.

		Programming
	Clock	Select	Timers
Mo	Select
	Clock
		Programming
	Clock	Select	Timers
Sa	Select
	Clock
		Programming
am
	Clock	Select	Timers
Sa	Select
	Clock

TIME OF DAY

4

5

To set the time press the “▲”			Programming
or “▼” buttons until the correct	am
		Clock	Select	Timers
time of day is displayed.	Sa	Clock
		Select

Pressing either button once will change the time in single minutes.

Holding eigther button down will change the time rapidly, first in minutes, then in hours.

CONFIRM SETTINGS
Press the “Select”or “Clock”		Programming
	am
button once to lock in and	Clock	Select	Timers
complete setting the time.	Sa
The ClockSelect indicators will go out.

– 24 –