HP UX Internet and Networking Software manual 275

Administration Commands

delete_lu62_timeout

resource_type	constant		GLOBAL_TIMEOUT
resource_name	character	17	(null string)

Supplied parameters are:

resource_type

Specifies the type of timeout being deleted. Possible values are:

GLOBAL_TIMEOUT

Delete timeouts that apply to all LU 6.2 sessions for the local node.

LOCAL_LU_TIMEOUT

Delete timeouts that apply to all LU 6.2 sessions for the local LU specified in the resource_name parameter.

PARTNER_LU_TIMEOUT

Delete timeouts that apply to all LU 6.2 sessions to the partner LU specified in the resource_name parameter.

MODE_TIMEOUT

Delete timeouts that apply to all LU 6.2 sessions on the mode specified in the resource_name parameter.

resource_name

Name of the resource whose timeout is being deleted. This value can be one of the following:

•If resource_type is set to GLOBAL_TIMEOUT, do not specify this parameter.

•If resource_type is set to LOCAL_LU_TIMEOUT, specify 1–8 type-A characters as a local LU name.

•If resource_type is set to PARTNER_LU_TIMEOUT, specify the fully qualified name of the partner LU as follows: 3–17 type-A characters consisting of a 1–8 character network name, followed by a period, followed by a 1–8 character partner LU name.

•If resource_type is set to MODE_TIMEOUT, specify 1–8 type-A characters as a mode name.

2.83.2 Returned Parameters

If the command executes successfully, the following parameter is returned:

primary_rc

OK

secondary_rc

(This parameter is not used.)

2.83.3 Error Return Codes

If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.

Parameter Check

If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:

primary_rc

PARAMETER_CHECK

secondary_rc

275