Administration Commands
query_tp_load_info
2.177 query_tp_load_info
The query_tp_load_info command returns information about TP load information entires..
2.177.1 Supplied Parameters
Parameter name | Type | Length | Default |
[query_tp_load_info] |
|
|
|
num_entries | decimal | 1 |
|
list_options | constant |
| LIST_INCLUSIVE |
tp_name | character | 64 | (null string) |
lualias | character | 8 | (null string) |
Supplied parameters are:
num_entries
Maximum number of extra data control blocks for which data should be returned. You can specify 1 to return data for a specific data control block, a number greater than 1 to return data for multiple data control blocks, or 0 (zero) to return data for the maximum number of data control blocks that can be accommodated in the supplied data buffer.
list_options
The position in the list from which SNAplus2 begins to return data.
Possible values are:
FIRST_IN_LIST
Start at the first entry in the list
LIST_INCLUSIVE
Start at the entry specified by the combination of the tp_name and lualias parameters.
LIST_FROM_NEXT
Start at the entry immediately following the entry specified by the combination of the tp_name and lualias parameters.
tp_name
The name of the TP to query. This name is a
lualias
The LU alias to query. This alias is an
This parameter can be used only if the TP is an APPC application; it must not be specified if the TP is a
2.177.2 Returned Parameters
Parameter name | Type | Length |
tp_name | character | 64 |
lualias | character | 8 |
description | character | 31 |
564
