Administration Commands
query_rtp_connection
2.165.3 Returned Parameters: Detailed Information
Parameter | Type | Length |
rtp_name | character | 8 |
first_hop_ls_name | character | 8 |
dest_node_name | character | 17 |
cos_name | character | 8 |
num_sess_active | decimal |
|
arb_mode | constant |
|
connection_type | constant |
|
max_btu_size | decimal |
|
liveness_timer | decimal |
|
local_tcid | hex array | 8 |
remote_tcid | hex array | 8 |
bytes_sent | decimal |
|
bytes_received | decimal |
|
bytes_resent | decimal |
|
bytes_discarded | decimal |
|
packets_sent | decimal |
|
packets_received | decimal |
|
packets_resent | decimal |
|
packets_discarded | decimal |
|
gaps_detected | decimal |
|
send_rate | decimal |
|
max_send_rate | decimal |
|
min_send_rate | decimal |
|
receive_rate | decimal |
|
max_receive_rate | decimal |
|
min_receive_rate | decimal |
|
burst_size | decimal |
|
up_time | decimal |
|
smooth_rtt | decimal |
|
last_rtt | decimal |
|
short_req_timer | decimal |
|
short_req_timeouts | decimal |
|
liveness_timeouts | decimal |
|
in_invalid_sna_frames | decimal |
|
in_sc_frames | decimal |
|
out_sc_frames | decimal |
|
delay_change_sum | decimal |
|
current_receiver_threshold | decimal |
|
minimum_receiver_threshold | decimal |
|
maximum_receiver_threshold | decimal |
|
sent_normals_count | decimal |
|
sent_slowdowns_count | decimal |
|
rcvd_normals_count | decimal |
|
rcvd_slowdowns_count | decimal |
|
dcs_reset_count_non_heal | decimal |
|
dcs_reset_count_healing | decimal |
|
arb_mode_color | decimal |
|
route | character |
|
If the command executes successfully and you specified DETAIL as the list_options parameter value, SNAplus2 returns the following parameters:
rtp_name
Name of the RTP connection.
first_hop_ls_name
Name of the link station of the first hop of the RTP connection.