Administration Commands
define_dspu_template
allow_timeout
Specifies whether to timeout host LUs used by the downstream LU if the session is left inactive for the timeout period specified on the host LU definition. Possible values are:
YES
SNAplus2 is allowed to timeout host LUs used by this downstream LU.
NO
SNAplus2 is not allowed to timeout host LUs used by this downstream LU.
This field is ignored if the downstream LUs are used to communicate with a SNAplus2 Primary RUI application instead of a host.
delayed_logon
Specifies whether to delay connecting the downstream LU to the host LU until the first data is received from the downstream LU. Possible values are:
YES
SNAplus2 delays connecting the downstream LU to the host LU. A simulated logon screen is sent to the downstream LU.
NO
SNAplus2 does not delay connecting the downstream LU to the host LU.
This field is ignored if the downstream LUs are used to communicate with a SNAplus2 Primary RUI application instead of a host.
2.21.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.21.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_TEMPLATE_NAME
The name specified for the template_name parameter was not valid.
INVALID_NAU_RANGE
The address specified on the min_nau or max_nau parameters was not in the valid range.
CLASHING_NAU_RANGE
The range of addresses specified by the min_nau parameter through the max_nau parameter in a dslu_template subrecord clashes with a range specified by another dslu_template subrecord in the template named by the template_name parameter.
87