Administration Commands
query_3270_user_sessions
The computer name on which the 3270 emulation program is running.
user_pid
The process ID of the 3270 emulation program.
user_uid
The user ID with which the 3270 emulation program is running.
user_gid
The group ID with which the 3270 emulation program is running.
user_gname
The group name with which the 3270 emulation program is running.
user_session_count
The number of sessions currently active for this copy of the 3270 emulation program. You can use query_3270_user_sessions to obtain detailed information about these sessions.
user_start_time
The time at which the user started the 3270 emulation program (this may be earlier than the start time for the first session). On
2.99.4 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_3270_USER
The user_name, system_name, or user_pid parameter was not set to a valid value.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.100 query_3270_user_sessions
The query_3270_user_sessions command returns information about a 3270 emulation user’s current sessions. The command can return summary or detailed information about a single session or multiple sessions,
299
