Administration Commands
delete_cpic_side_info
SNAplus2 will remap these modes to the default COS (specified by a define_mode command with no mode name) or to the
2.66.1 Supplied Parameters
Parameter name | Type | Length |
[delete_cos] |
|
|
cos_name | character | 8 |
Supplied parameter is:
cos_name
Specifies the class of service name to be deleted. This name is
2.66.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.66.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
COS_NAME_NOT_DEFD
The supplied name is not the name of a COS defined on the SNAplus2 node.
SNA_DEFD_COS_CANT_BE_DELETED
The supplied name is the name of an
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.67 delete_cpic_side_info
The delete_cpic_side_info command deletes a
253
