Administration Commands
query_cos_node_row
node_row_index | decimal | 0 |
Supplied parameters are:
num_entries
Maximum number of COS node rows for which data should be returned. You can specify 1 to return data for a specific COS node row, a number greater than 1 to return data for multiple COS node rows, or 0 (zero) to return data for all COS node rows.
list_options
The position in the list of COS node rows from which SNAplus2 begins to return data. The list is ordered by cos_name, and then by node_row_index, for each COS.
Possible values are:
FIRST_IN_LIST
Start at the first entry in the list
LIST_INCLUSIVE
Start at the entry specified by the combination of the cos_name and node_row_index parameters
LIST_FROM_NEXT
Start at the entry immediately following the entry specified by the combination of the cos_name and node_row_index parameters
cos_name
Class of service name for which node row information is required, or the name to be used as an index into the list. This value is ignored if list_options is set to FIRST_IN_LIST. The name is a
node_row_index
Node row number for which information is required, or the number to be used as an index into the list. This value is ignored if list_options is set to FIRST_IN_LIST. Use query_cos to determine the number of node rows associated with this COS.
2.112.2 Returned Parameters
Parameter name | Type | Length |
cos_name | character | 8 |
node_row_index | decimal |
|
min_rar | decimal |
|
min_status | constant |
|
max_rar | decimal |
|
max_status | constant |
|
weight | decimal |
|
If the command executes successfully, SNAplus2 returns the following parameters:
cos_name
Specifies the class of service (COS) name.
node_row_index
Specifies the node row index.
min_rar through weight
325