Administration Commands
query_node
are included in the Attach message that SNAplus2 receives, SNAplus2 normally checks the parameters (and rejects the Attach if they are not valid) even though the invokable TP does not require conversation security. This value disables the checking, so that SNAplus2 does not check security parameters on a received Attach if the invokable TP does not require it.
FORCE_STANDARD_ARB
SNAplus2 normally advertises support on RTP connections for both the standard ARB algorithm and the ARB responsive mode algorithm. If this value is set, SNAplus2 will only advertise support for the standard ARB algorithm.
DLUR_UNBIND_ON_DACTLU
SNAplus2 does not normally end the
NO_TCPIP_VECTOR
SNAplus2 TN Server normally includes the TCP/IP Information Control Vector (0x64) in an Open(SSCP) request to the host for a TN3270 session. This vector contains the TCP/IP address and port number used by the TN3270 client, which can be displayed on the host console or used by the host (for example in billing). In some cases, for example if the host is running an older version of VTAM that does not support this vector, you may need to override this behavior so that the vector is not sent. If this value is set, SNAplus2 does not send the TCP/IP Information Control Vector.
max_ls_exception_events
The maximum number of LS exception events recorded by the node.
max_compression_level
The maximum compression supported by the node for LU session data. This parameter is always set to LZ10.
up_time
Time, in hundredths of a second, since the node was started. If this parameter is 0 (zero), this indicates that the node is inactive.
nn_functions_supported
Specifies the network node functions that are supported. This parameter can be one or more of the following values, which can be combined with a + character:
RCV_REG_CHAR
Node supports receiving registered characteristics.
GATEWAY
Node is a gateway node.
CDS
Node supports central directory server (CDS) function.
TREE_CACHING
Node supports route tree cache.
TREE_UPDATES
Node supports incremental tree updates. If incremental tree updates are supported, tree caching must also be supported.
ISR
Node supports ISR.
This parameter is reserved for an end node or LEN node.
487
