HP UX Internet and Networking Software manual Lstws, Lstwa

Models: UX Internet and Networking Software

1 651
Download 651 pages 11.83 Kb
Page 170
Image 170

Administration Commands

define_qllc_port

Specifies the link station transmit/receive capability. Possible values are:

LS_TWS

Two-way simultaneous

LS_TWA

Two-way alternating

max_ifrm_rcvd

Maximum number of I-frames that can be received by the local link stations before an acknowledgment is sent. Specify a value in the range 1127.

target_pacing_count

Indicates the desired pacing window size. Specify a value in the range 132,767.

max_send_btu_size

Maximum BTU size that can be sent from this port. This value is used to negotiate the maximum BTU size that a pair of link stations can use to communicate with each other. The value includes the length of the TH and RH (total 9 bytes), as well as the RU.

address

Local X.25 DTE address of the port. This address must match the address configured in your X.25 driver for this network.

Note

If no address is specified, an outgoing call request generated by SNAplus2 will not contain the X.25 calling address. Some hosts require this address as a security measure on incoming calls, and may not accept the connection without it.

implicit_cp_cp_sess_support

Specifies whether CP-CP sessions are allowed for implicit link stations using this port. Possible values are:

YES

CP-CP sessions are allowed for implicit link stations.

NO

CP-CP sessions are not allowed for implicit link stations.

implicit_limited_resource

Specifies whether implicit link stations off this port are defined as limited resources. Possible values are:

NO

Implicit links are not limited resources and are not automatically deactivated.

NO_SESSIONS

Implicit links are limited resources and are automatically deactivated when no active sessions are using them.

INACTIVITY

Implicit links are limited resources and are automatically deactivated when no active sessions are using them or when no data has flowed for the time period specified by the implicit_deact_timer parameter.

• If no SSCP-PU session is active across the link, the node deactivates the link immediately.

170

Page 170
Image 170
HP UX Internet and Networking Software manual Lstws, Lstwa