HP UX Internet and Networking Software manual 329

Administration Commands

query_cos_tg_row

min_user_def_parm_1 through min_user_def_parm_3

Minimum limits for user-defined parameters, which you can use to include TG characteristics not covered by previously defined parameters. Each of these parameters has a range of 0–255.

max_effect_cap

Maximum limit for line speed, in bits per second.

max_connect_cost

Maximum limit for cost per connect time.

max_byte_cost

Maximum limit for cost per byte.

max_security

Maximum level of security. Possible values are:

SEC_NONSECURE

Data is transmitted over an unsecured network.

SEC_PUBLIC_SWITCHED_NETWORK

Data is transmitted over a public-switched network.

SEC_UNDERGROUND_CABLE

Data is transmitted over secure underground cable.

SEC_SECURE_CONDUIT

Data is transmitted over a line in a secure conduit that is not guarded.

SEC_GUARDED_CONDUIT

Data is transmitted over a line in a conduit that is protected against physical tapping.

SEC_ENCRYPTED

Data is encrypted before transmission over the line.

SEC_GUARDED_RADIATION

Data is transmitted over a line that is protected against physical and radiation tapping.

SEC_MAXIMUM

Data is transmitted over a network that has maximum security.

max_prop_delay

Maximum limits for propagation delay, which is the time that a signal takes to travel the length of the link, in microseconds.

Possible values are:

PROP_DELAY_MINIMUM

Minimum propagation delay.

PROP_DELAY_LAN

Delay is less than .5 microseconds (typical for a LAN).

PROP_DELAY_TELEPHONE

Delay is in the range .5–50 microseconds (typical delay for a telephone network).

PROP_DELAY_PKT_SWITCHED_NET

Delay is in the range 50–250 microseconds (typical delay for a packet-switched network).

PROP_DELAY_SATELLITE

329