Administration Commands
query_directory_stats
OTHER
The entry is an unknown type.
apparent_lu_owner_name
This parameter applies only if the local node is a Network Node or a Branch Network Node; it is not used otherwise.
If the apparent owning CP of this LU is not the real owning CP, this parameter specifies the fully qualified name of the apparent owning CP; otherwise it is not used. For example, if the resource is owned by an End Node in the domain of a Branch Network Node (BrNN), the directory of this BrNN’s Network Node Server includes the BrNN as the apparent owner, but the real owning CP is the End Node.
The name consists of a
2.119.4 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_LU_NAME
The list_options parameter was set to LIST_INCLUSIVE to list all entries starting from the supplied name, but the lu_name parameter value was not valid.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.120 query_directory_stats
The query_directory_stats command returns directory database statistics, that can be used to gauge the level of network locate traffic. For a network node, it returns statistics on the usage of the directory cache; you can use this information to determine the appropriate cache size, which is specified in the node definition.
This command must be issued to a running node.
2.120.1 Supplied Parameters
[query_directory_stats]
345
