Administration Commands
define_partner_lu
plu_un_name
Uninterpreted name of the partner LU (the name of the LU as defined to the remote SSCP). The name is a
To use the default uninterpreted name (the same as the network name taken from the fqplu_name parameter), do not specify this parameter. This parameter is only relevant if the partner LU is on a host and dependent LU 6.2 is used to access it.
max_mc_ll_send_size
The maximum size of logical records that can be sent and received by mapped conversation services at the partner LU. Specify a number in the range
conv_security_ver
Specifies whether the partner LU is authorized to validate user IDs on behalf of local LUs (whether the partner LU can set the already verified indicator in an Attach request). Possible values are:
YES
The partner LU is authorized to validate user IDs.
NO
The partner LU is not authorized to validate user IDs.
parallel_sess_supp
Specifies whether the partner LU supports parallel sessions. Possible values are:
YES
The partner LU supports parallel sessions.
NO
The partner LU does not support parallel sessions.
2.43.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.43.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
DEF_PLU_INVALID_FQ_NAME
The fqplu_name parameter contained a character that was not valid.
INVALID_UNINT_PLU_NAME
148