Insignia NS-30HTV manual Troubleshooting, Problem Solution

3Press or to select SIGNAL METER, then press or . The SIGNAL METER opens, showing you the digital signal strength.

SIGNAL METER

CHANNEL (DIGITAL) 123-045

80

4Press EXIT on the remote to return to normal viewing.

Notes	•	The signal meter feature is not available
		for analog channels.
	•	After 240 seconds, the SIGNAL METER
		screen returns to normal TV operation
		automatically.

Troubleshooting

Use the following check list for troubleshooting when you have problems with your TV. Consult your local dealer or service outlet if problems persist. Make sure that all connections are correctly made when using with other units.

Problem	Solution
TV does not	• Make sure that the power cord is
operate	plugged in.
	• Try another AC outlet.
	• Power is off, check fuse or circuit
	breaker.
	• Unplug your TV for an hour, then plug it
	back in.
Poor or no	• Station or cable experiencing problems,
sound	tune to another station.
	• Check the sound adjustments (Volume
	and Mute).
	• Check for possible sources of
	interference.
Poor or no	• Station or cable experiencing problems,
picture	tune to another station.
	• Make sure that channels are set into
	memory.
	• Check antenna or cable connections,
	and try adjusting the antenna.
	• Check for sources of possible
	interference.
	• Check picture control adjustments.
Poor reception	• Station or cable experiencing problems,
on some	tune to another station.
channels	• Make sure that channels are set into
	memory.
	• Station is weak, adjust the antenna to
	receive a better reception.
	• Check for possible sources of
	interference.

Poor or no color	•	Station or cable experiencing problems,
		tune to another station.
	• Make sure that channels are set into
		memory.
	• Check the picture control adjustments.
	• Check the antenna or cable connections,
		adjust the antenna.
	• Check for possible sources of
		interference.
Picture wobbles	•	Station or cable experiencing problems,
or drifts		tune to another station.
	• Make sure that channels are set into
		memory.
	• The cable company is scrambling the
		signal.
	•	Adjust the antenna.
Digital broadcast	•	Check the digital signal strength.
screen problem
No cable TV	•	Check all cable connections.
reception	•	Set TV/CABLE menu option to the
		CABLE mode.
	• Station or cable system problems, try
		another station.
Horizontal or	•	Check the antenna connections and
diagonal bars on		adjust or re-direct the antenna.
the screen	•	Check for possible sources of
		interference.
No reception	•	Make sure that the TV/CABLE menu
above channel		option is in the appropriate mode.
13	•	If you are using an antenna, check the
		UHF antenna connections.
No remote	•	Batteries are weak, dead, or inserted
control		incorrectly.
operation	•	The remote is out of range, move closer
		to TV (within 15 feet).
	• Make sure that remote is aimed at the
		sensor.
	• Confirm that there are no obstructions
		between the remote and your TV.
	• Make sure that the power cord is
		plugged in.
TV turns off	•	No broadcast on the station tuned.
	• The Sleep Timer is set.
	• The power has been interrupted.
Closed Caption	•	The TV station is experiencing problems
is not activated		or the program tuned is not closed
		captioned. Try another channel.
	• Check the cable connection or the VHF/
		UHF antenna. Reposition or rotate the
		antenna.
	• Set the Closed Caption decoder in the
		menu.
The display is	•	Select the correct language in the menu
not shown in		options.
your language

24 www.insignia-products.com