Connections to other equipment

The exact arrangement you use to connect various video and audio components to your TV is dependent on the model and features of each component. Check the owner's manual provided with each component for the location of video and audio inputs and outputs.

The connection diagrams are offered as suggestions. You may need to modify them to accommodate your particular selection of components. The diagrams are intended to show component video and audio connections

Connecting your TV to a DVD player or satellite receiver with an S-Video cable

To Audio

To S-Video OUT

To S-VIDEO IN 1

 

OUT jacks

(or 2)

TV back

jack

 

 

 

S-Video cable (not supplied)

only.

Connecting your TV to a VCR

Audio cable (not supplied)

To AUDIO IN 1 (or 2) jacks

TV back

To Audio/Video OUT jacks

Audio/video cable (not

supplied)

To AUDIO/VIDEO 1 (or 2) IN jacks

Connecting your TV to a VCR with an S-Video cable

Use this method to connect your TV to video devices with an S-Video output jack. This type of connection provides better picture quality than the audio/video cable connection.

Use a commercially available S-Video cable for this connection.

If you connect a VCR with an S-Video cable to the S-VIDEO IN jack on the back of your TV, you must also connect the audio cords to the AUDIO IN jacks on the back of your TV. The S-Video cable only carries the video signal. The audio signal is separate.

Connecting your TV to a DVD player with component video

To Audio

To Component OUT

 

OUT

Y PB PR jacks

 

jacks

 

TV back

 

To Component IN jacks

 

 

Video cable (not supplied)

Audio cable (not

 

supplied)

To AUDIO IN jacks

 

Note

The Component video inputs of your TV are for

 

use with devices which output 480i/1080i

 

interlaced signals and 480p/720p progressive

 

signals.

 

 

Connecting your TV to a DTV receiver/set-top box

If you connect a DTV receiver/set-top box, connect your TV to it by using a component video cord.

To Audio OUT

To S-Video OUT

jacks

jack

 

 

S-Video cable (not

 

supplied)

 

Audio cable (not

 

supplied)

To S-VIDEO IN

TV back

jack

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To AUDIO IN 1 (or 2) jacks

To Audio

 

To Component OUT

OUT

 

jacks

jacks

Y PB PR

TV back

 

 

To Component IN

 

 

jacks

 

Video cable (not

 

supplied)

 

 

Audio cable (not

 

supplied)

To AUDIO IN jacks

Note

If you connect to the S-VIDEOand VIDEO jacks at

 

the same time, the S-Video connection has

 

priority.

 

 

Connecting an external audio system

This connection lets you use an audio amplifier and external speakers, and adjust the audio level using your TV’s remote control.

www.insignia-products.com

5

Page 7
Image 7
Insignia NS-30HTV manual Connections to other equipment