HP UX Internet and Networking Software manual Sidh, Sidl, Odai, Messagetype

Administration Commands

add_dlc_trace

sidh

Session ID high byte

sidl

Session ID low byte

odai

Origin Destination Assignor Indicator. Possible values are:

YES

The BIND sender is the node containing the secondary link station.

NO

The BIND sender is the node containing the primary link station.

message_type

The type of messages to trace for the specified resource or session. To trace all messages, set this parameter to TRACE_ALL. To trace specific messages, specify one or more of the following values (combined using a

+character):

TRACE_XID

Trace XID messages

TRACE_SC

Trace Session Control Request/Response Units (RUs)

TRACE_DFC

Trace Data Flow Control RUs

TRACE_FMD

Trace Function Management Data messages

TRACE_SEGS

Trace Non-BBIU segments that do not contain an RH

TRACE_CTL

Trace Messages other than MUs and XIDs

TRACE_NLP

Trace Network-Layer Protocol messages

TRACE_NC

Trace Network Control messages

For tracing on an RTP connection, the values TRACE_XID, TRACE_NLP, and TRACE_CTL are ignored. At least one of the other values listed must be specified for RTP tracing.

2.3.2 Returned Parameters

No parameters are returned by SNAplus2 when this command executes successfully.

2.3.3 Error Return Codes

If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.

43