Administration Commands
query_directory_lu
lu_name | character | 17 | (null string) |
Supplied parameters are:
num_entries
Maximum number of LUs for which data should be returned. You can specify 1 to return data for a specific LU, a number greater than 1 to return data for multiple LUs, or 0 (zero) to return data for all LUs.
list_options
The level of information required for each entry and the position in the list of LUs from which SNAplus2 begins to return data.
Specify the level of information required with one of the following values:
SUMMARY
Summary information only
DETAIL
Detailed information
Use a + character to combine this value with one of the following values:
FIRST_IN_LIST
Start at the first entry in the list
LIST_INCLUSIVE
Start at the entry specified by the lu_name parameter
LIST_FROM_NEXT
Start at the entry immediately following the entry specified by the lu_name parameter
lu_name
Fully qualified name of the LU for which information is required, or the name to be used as an index into the list of LUs. This value is ignored if list_options is set to FIRST_IN_LIST. Specify
2.119.2 Returned Parameters: Summary Information
Parameter name | Type | Length |
lu_name | character | 17 |
description | character | 31 |
If the command executes successfully and you specified SUMMARY as the list_options parameter value, the following parameters are returned:
lu_name
Fully qualified name of the LU.
description
A text string describing the directory entry, as specified in the definition of the directory entry.
2.119.3 Returned Parameters: Detailed Information
Parameter name | Type | Length |
lu_name | character | 17 |
