![](/images/new-backgrounds/1308428/308428567x1.webp)
Administration Commands
delete_tn3270_association
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.91 delete_tn3270_association
The delete_tn3270_association command deletes an association between a display LU and a printer LU, given the display LU name.
2.91.1 Supplied Parameters
Parameter | Type | Length |
[delete_tn3270_association] |
| |
display_lu_name | character | 8 |
Supplied parameter is:
display_lu_name
Name of the display LU whose association is to be deleted. This name is a
2.91.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.91.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
INVALID_LU_NAME
The value specified for the display_lu_name parameter was not a valid
State Check
If the command does not execute because of a state error, SNAplus2 returns the following parameters:
primary_rc
STATE_CHECK
secondary_rc
INVALID_LU_NAME
No association is defined for the specified display LU.
284